topleft1.gif (2468 bytes) topleft2.gif (2164 bytes) topleft3.gif (1774 bytes)

 

 

 

 

 

Operating Frequencies: 470 to 608 MHz crystal controlled

Sensitivity: Better than 0.35uV for 20 dB SINAD without

compandor; 1.5uV for 50dB S/N ratio

Signal/Noise Ratio: 106 dB, A-weighted

Squelch Quieting: greater than 106 dB

AM Rejection: >60 dB (10uV to 0.1 Volts)

Modulation acceptance: ±15kHz

Front-end Selectivity: -22dB at +/- 4 MHz

Image and Spurious Rejection: greater than 100 dB

Third Order Intercept: –5 dBm

Audio outputs: XLR: 200 Ohms bal; 100mV max.

Headphone: 600mV RMS at 50 Ohms

Antenna input: 50 Ohm BNC

Controls: • Front panel attenuator controls XLR

output

•Recessed trim-pot controls headphone

• 3 position power/function switch

Indicators: • Red LED for power "ON"

• 2 LEDs for mod level

• "RF" LED for transmitter "ON"

Power requirements: • 11.5 to 24 Volts DC external (either polarity)

• 110 Volts AC via CH-12 AC adapter

• Single 9 Volt alkaline batter y

Power consumption: 55 mA

Weight: 11 ounces including battery

Dimensions: 1.1 x 2.75 x 5.2 inches