topleft1.gif (2468 bytes) topleft2.gif (2164 bytes) topleft3.gif (1774 bytes)

 

 

 

 

 
Power Requirements: AC 120 V +/-10% 50 to 60 Hz
Power Consumption: 150 W
Format: DVCPRO
Recording Track: 1/4" Digital compressed recording
Digital Video
Digital Audio:  2 CH
TC:  REC in Sub-Code area
Cue: 1 track
CTL:  1 Track
Tape Speed: 33.813 mm/s
Tape: 1/4" Metal Particle Tape
Cassette size: AJ-P123L: 125 x 78 x 14.6 mm
AJ-P63M:  97.5 x 64.5 x 14.6mm
Recording/playback time: Max 123 min. with AJ-P123L
Max 63 min. with AJ-P63M
FF/REW Time: Within 3 min. using AJ-P123L
Within 2 min. using AJ-P63M
Editing accuracy: ± 0 frame (AJ-D 650, with TC)
Tape Timer Accuracy: ± 1 frame (AJ-D650 continuous use CTL)
Operating Temperature: 5°C to 40°C (41°F to 104°F)
Operating Humidity: Less than 85%
Weight: 35.2 lb (16 kg)
Dimensions (W x H x D) 430 mm x 178 mm x 422 mm
(16-15/16" x 7" x 16-5/8")
VIDEO
Sampling Frequency: Y: 13.5 MHz
C: (PB/PR): 3.375 MHz
Quantization: 8 bits/sample
Error correction: Reed-Solomon Product Code
DIGITAL IN/ANALOG COMPONENT OUT
Bandwidth: Y: 30 Hz to 5.5 MHz (±1 dB)
R:-Y/B-Y: 30 Hz to 1 MHz (±1 dB)
S/N ratio: 60 dB or more 
K Factor: 2% or less
ANALOG COMPONENT IN/COMPONENT OUT
Bandwidth: Y: 30 Hz to 5.5 MHz (+1.0/-1.5 dB)
R-Y/B-Y: 30 Hz to 1 MHz (+1.0/-2.0 dB)
S/N Ratio: 55 dB or Typ.
K Factor: 2% or less
ANALOG COMPOSITE IN/COMPOSITE OUT
Bandwidth: Y: 30 Hz to 5.5 MHz (+1.0/-1.5 dB)
Y/C Delay: 20 ns or less
K Factor: 3% or less
AUDIO
Sampling Frequency: 48 kHz
Quantization: 16 bit/sample (Digital Audio)
Frequency Response: 20 Hz to 20kHz, (+0.5/-1.0 dB)
Crosstalk: Less than -80 dB (at 1Khz, between 2 channels)
Dynamic Range: More than 86 dB (at 1kHz, emphasis off, "A"WTD)
Wow & Flutter: Below measurable limit
Headroom: 20 dB
Demphasis: T1=50 µs/T2=15 µs (On/Off) (Cue)
Frequency Response: 300 Hz to 6 kHz +/-3 dB
PROCESSOR ADJUSTMENT (VIDEO OUT)
Video gain: ± 3 dB*
Chrome gain: ± 3 dB*
Chrome phase: ± 30 deg.
Set up: ± 15 IRE*
Sync phase: ± 2 sec
SC phase: ± 180 deg.
NOTE
* Only with external encoder remote controller
VIDEO INPUT SIGNAL
Analog Component: BNC x3 (Y, PB, PR)
Y: 1.0 Vp-p, 75 ohms
PB/PR: 0.486/0.7 Vp-p, 75 ohms (75% Color Bar)
Analog Y/C: S-VIDEO (4P) x 1
Y: 1.0 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms (Burst)
Analog Composite: BNC x 2, loop-through with 75 ohms On/Off
Reference: Analog Composite
BNC x 2, loop-through with 75 ohms On/Off
Serial Digital Component: BNC x 2, active throughout
SMPTE 259M-C (option)
VIDEO OUTPUT SIGNAL
Analog Component: BNC x3 (Y, PB, PR)
Y: 1.0 Vp-p, 75 ohms
PB/PR: 0.486/0.7 Vp-p, 75 ohms (75% Color Bar, 7.5% Set up))
Analog Y/C: S-VIDEO (4P) x 1
Y: 1.0 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms (Burst)
Analog Composite: BNC x 3
VIDEO1, VIDEO2, VIDEO3 (Superimpose On/Off)
Serial Digital Component: BNC x 3, SMPTE 259M-C (option)
AUDIO INPUT SIGNAL
Analog (CH1, CH2): XLR x 2, 600 ohms, 4/0/-20/-60 dBu
Digital (CH1, CH2): BNC x 1 , AES/EBU format (option)
SDI (option): BNC x 2 active throughout 75 ohms (Video and Audio)
SMPTE 259M-C, 272M
AUDIO OUTPUT SIGNAL
Analog (CH1, CH2): XLR x 2, Low impedance, 4/0/-20 dBu
Digital (CH1, CH2): BNC x 1 , AES/EBU format (option)
SDI (option): BNC x 3 (Video and/or Audio), 75 ohms
SMPTE 259M-C, 272M
Monitor: RCA x 1, 600 ohms, -8 dBv
Headphone: Variable level control, M6, 8 ohms
OTHERS
Time Code Input: BNC x 1, 0.5 to 8.0 Vp-p
Time Code Output: BNC x 1 , 2.0 Vp-p
Remote In: D-sub 9-Pin, RS-422A interface
RS-232C: D-sub 25-Pin, RS-232C interface
Encoder Remote In: D-sub 15-Pin
Standard Accessory: AC power cord x1