| Power Requirements: | AC 120 V ±10% 50 to 60 Hz |
| Power Consumption: | 165 W |
| Format: | DVCPRO |
| Recording Track: | 1/4"
Digital compressed recording Digital Video Digital Audio: 2 CH TC: REC in Sub-Code area Cue: 1 track CTL: 1 Track |
| Tape Speed: | 33.813 mm/s |
| Tape: | 1/4" Metal Particle Tape |
| Cassette size: | AJ-P123L:
125 x 78 x 14.6 mm AJ-P63M: 97.5 x 64.5 x 14.6mm |
| Recording/playback time: | Max
123 min. with AJ-P123L Max 63 min. with AJ-P63M |
| FF/REW Time: | Within
3 min. using AJ-P123L Within 2 min. using AJ-P63M |
| Editing accuracy: | ± 0 frame (with TC) |
| Tape Timer Accuracy: | ± 1 frame (continuous use) |
| Operating Temperature: | 5°C to 40°C (41°F to 104°F) |
| Operating Humidity: | 10% to 90% (non DEW) |
| Weight: | 39.6 lb (18 kg) |
| Dimensions (W x H x D) | 16-6/8"
x 6-7/8" x 16-3/8" (424 x 175 x 415 mm) |
| VIDEO | |
| Sampling Frequency: | Y:
13.5 MHz C: (PB/PR): 3.375 MHz |
| Quantization: | 8 bits/sample |
| Error correction: | Reed-Solomon Product Code |
| DIGITAL IN /ANALOG COMPONENT OUT | |
| Bandwidth: | Y:
30 Hz to 5.5 MHz (± 0.5 dB) 5.75 MHz (-2 dB) R-Y/B-Y: 30 Hz to 1.3 MHz (±1 dB) 30 Hz to 1.5 MHz (-5 dB) Typ. |
| S/N Ratio: | 60 dB or less |
| K Factor: | 1% or less |
| ANALOG COMPONENT IN/COMPONENT OUT | |
| Bandwidth: | Y:
30 Hz to 5.5 MHz (±dB) 5.75 MHz (-3 dB) R-Y/B-Y: 30 Hz to 1.3 MHz (±1 dB) 30 to 1.5 MHz (-6 dB) Typ. |
| S/N Ratio: | 55 dB or more |
| K Factor | 1% or less |
| ANALOG COMPONENT IN/COMPONENT OUT | |
| Bandwidth: | Y: 30 Hz to 4.5 MHz (± 1 dB) |
| Y/C Delay: | 20 ns or less |
| K Factor: | 2 % or less |
| AUDIO | |
| Sampling Frequency: | 48 khz |
| Quantization: | 16 bit/sample (Digital Audio) |
| Frequency Response: | 20 Hz to 20kHz, (± dB) |
| Crosstalk: | Less than -80 dB (at 1 KhZ, between 2 channels) |
| Dynamic Range: | More than 90 dB (at 1 kHz, emphasis off, "A" WTD) |
| Wow & Flutter: | Below measurable limit |
| Headroom: | 20 dB |
| Emphasis: | T1=50 µs/T2=15µs (On/Off selectable) |
| Operating Level: | +4/0/-20 dBu switchable (Analog Line In/Out) (Cue) |
| Frequency Response: | 300 Hz to 6 kHz ±3 dB |
| PROCESSOR ADJUSTMENT (VIDEO OUT) | |
| Composite Video In: | ± 3 dB |
| Video gain: | ± 3 dB |
| Chroma gain: | ± 3 dB |
| Hue: | 30 |
| Set up: | ± 15 IRE |
| Sync phase: | ± 8 usec |
| SC phase: | ± 18.0 deg. |
| Y/C Delay: | ± 300 nsec |
| VIDEO INPUT SIGNAL | |
| Analog Component: | BNC
x3 (Y, PB, PR) Y: 1.0 Vp-p, 75 ohms RY-BY: 0.486/0.7 Vp-p, 75 ohms (75% Color Bar, 7.5% set-up) |
| Analog Composite: | BNC x 2, loop-through with 75 ohms On/Off |
| Reference: | Analog
Composite BNC x 2, loop-through with 75 ohms On/Off |
| Serial Digital Component: | BNC
x 2, active throughout SMPTE 259M-C (option) |
| VIDEO OUTPUT SIGNAL | |
| Analog Component: | BNC
x3 (Y, PB, PR) Y: 1.0 Vp-p, 75 ohms RY-BY: 0.486/0.7 Vp-p, 75 ohms (75% Color Bar, 7.5% Set up) |
| Analog Composite: | BNC
x 3 VIDEO1, VIDEO2, VIDEO3 (Superimpose On/Off) |
| Serial Digital Component: | BNC x 3, SMPTE 259M-C (option) |
| AUDIO INPUT SIGNAL | |
| Analog (CH1, CH2): | XLR x 2, 600 ohms, High Impedance switchable 4/0/-20/-60 dBu |
| Digital (CH1, CH2): | XLR x 1 , AES/EBU format (option) |
| SDI (option): | BNC
x 3 active throughout 75 ohms (Video and Audio) SMPTE 259M-C, 272M |
| CUE: | XLR x1, High Impedance, 4/0/-20/60 dBu |
| AUDIO OUTPUT SIGNAL | |
| Analog (CH1, CH2): | XLR x 2,Low Impedance , 4/0/-20 dBu |
| Digital (CH1, CH2): | XLR x 1 , AES/EBU format |
| SDI Interface (option): | BNC
x 3 Active throughout (Video and Audio) SMPTE 259M-C/272M |
| CUE: | XLR x 1, Low Impedance, 4/0/-20/-60 dBu |
| Monitor: | XLR x 2, Low Impedance, 4/0/-20 dBu |
| Headphone: | Variable level control, M6, 8 ohms |
| OTHERS | |
| Time Code Input: | XLR x 1, 0.5 to 8.0 Vp-p |
| Time Code Output: | XLR x 1 ,2.0 Vp-p |
| Remote In/Out: | D-sub 9-Pin, RS-422A interface |
| Remote Out: | D-sub 9-Pin, RS-422A interface |
| RS-232C: | D-sub 25-Pin, RS-232C interface |
| Parallel: | D-sub 25-Pin |
| Encoder Remote In: | D-sub 15-Pin |
| Standard Accessory: | AC power cord x1 |