ISR (Interactive Status Reporting) Monitor Diagnostics - When linked to an ISR Network, the monitor can be queried for current operating conditions. MODULAR CONTROL PANEL A separate control panel allows for valuable rack space saving. (A 14" stand alone version with built-in controls is also available) Auto White Balance Compatibility with Industry Std Color Analyzers- Precise color temperature adjustment is possible with well known industry analyzers such as Minolta, Thoma, Philips, Tektronix, Grasby. Auto white balance is also possible using the Sony BKM14L (Auto setup probe) Higher Resolution Sharper Image - With the new and improved CRT, Sony has surpassed the quality of its previous line of high resolution without tradeoff in color uniformity SMPTE C Phosphors Precise and Consistent Color reproduction SMPTE standard phosphors maintain precise color representation which allows for accurate color reproduction and easy monitor matching. Color Temperature Stability As the CRT ages or ambient temperature changes, the drive of the electron beam is continually adjusted so that consistent color temperature is maintained. Auto Setup Built-in auto setup will automatically adjust the chroma and phase. Close Caption Reader Decodes and displays text from captioned signals. VITC Reader (Vertical Interval Time Code) On screen display of time code for editing and duplication references. On Screen Display Menus Adjustment and setup functions and parameters are displayed through easy to read screen menus. EDH (error Detection and handling of signal) Alerts user to detection of signal problems- Adopts SMPTE RP165 for detection and display of digital signal errors. Optional Input Adapters - Monitors can be customized to meet specific applications by adding appropriate rear panel pug-in type boards. The decoder adapters (common throughout all models) are designed to be plugged into the rear panel, making configuration and board exchange quick and simple with the tightening of two thumb screws. After the boards are installed, the monitor automatically recognizes the type, capabilities and serial number of the card installed. Multiple Input Slots Allows the monitor to be configured with multiple boards for various combinations of decoders and additional inputs. IC Memory Card Setup and configuration information can be stored and interchanged between monitors using the convenient IC card RS-485 Remote Control Capability Addressable Monitor Control - Computer control of all functions for one or more monitors in multimonitor applications. Safe Area/Title Area On screen display of safe area and title markers in 4:3 and 16:9 aspect ratios for titling references. System 525 lines 60 fields 0r 625 lines 50 fields interlaced Power Requirements AC 100-120V/220-240V, 50/60 Hz (UL listed for 120V only) Power Consumption 1.7-2.0 A / 0.9-1.0 A CRT Type HR Trinitron CRT; SMPTE C Phosphors; AG pitch: 0.3 mm; 90( deflection; center resolution 900 TV lines Screen Size 19 x 15 1/4 x 11 1/2 inches (482 x 386 x 291 mm) Color Temperature PRESET: Factory adjusted for D65 white. Manual control is also available, allowing user setting of color temperature Stability of Raster Size 1% of picture height for a 100% APL change (when 100% peak white is set to 30ft-L) External Sync Loop-through BNC x 1, 1.8 Vp-p negative, high impedance. Underscan 3% underscan of the effective picture area Convergence 0.4mm within circle centered on the screen with a diameter equal to the vertical height, 0.7mm at any other point RGB 1.0Vp-p ( 6dB positive, high impedance ISR D sub 9-pin Brightness (preset) 30 ft-L Slots for Input Adaptors 4 Connectors Loop-through BNC x 3 Analog Component Y: 1.0 Vp-p, ( 6dB, high impedance R-Y/B-Y: 0.7Vp-p ( 6dB, high impedance Return Loss More than 46dB (7MHz when 75( terminated) Remote Control Inputs Remote 1: Loop-through D sub 9-pin -(for RS-485 serial remote control), Remote 2: D sub 9-pin AFC Time Constant Fast mode:0.5ms; Normal mode 2ms Horizontal Hold ( 500 Hz (when AFC 0.5ms) Retrace Time Horizontal: Normal within 1ms, Underscan within 0-8ms; Vertical: within 10s RASTER AND PICTURE PERFORMANCE Normal Scan 5% overscan of the effective picture area Linearity 0.5% within circle centered on the screen with a diameter equal to the vertical height, 1% at any other point Operating Temp. range 0 to 40 (C (32-104 (F) Optimum operating range 20-30( C (68-86(F) Humidity 0-90% non-condensing Altitude 10,000 ft. (Approx 3,050 m) Dimensions (w x H x D) 17 1/2" x 16 3/*" x 23 5/8" (444 x 414 x 570mm) Weight 81lbs 9oz (37 kg)