|
|
|
|
Identify
monitor setup - The new "Status" menu is a convenient
reference for identifying the monitor model name and existing
monitor settings for color system, color temp, component level,
color setup levels, ACC, comb filters, and input boards. |
|
Identify/select
remote setup - The new "Serial Remote" menu is a
convenient reference for identifying and selecting the setup for
the remote control: OFF, ON, single address*, group address. By
viewing this menu, the user can identify and activate the serial
remote for one or more monitors. (*when the optional BKM-103 is
installed) |
|
Convenient
sub controls setup - The "Sub Control" menu allows on
screen adjustment of the center "detent" value of the
contrast, brightness, chroma, and phase knobs. |
|
Copy
D65 & D93 temperature settings -The new User Copy menu allows the user to copy D65 and D93 temperature settings into
the user setting to speed custom white balance
adjustment.
|
|
Horizontal
<4%
Vertical <4% |
|
|
Line
(composite) 10MHz ± 3dB (Y signal only)
RGB 10MHz ± 3dB
Y/C 10MHz ± 3dB (Y signal only) |
|
Center
0.4mm
Corner 0.5mm |
|
|
6500K,
9300K, USER (3200K-10000K) |
|
|
346mm
(13.62")W x 340mm (13.39")H x 430.5mm (16.95")D |
|
14"
(13" viewable area, measured diagonally) |
|
IN
OUT
Composite 2 2
Y/C 1 1
Analog RGB/ 1 1
Component 1 1
Ext. Sync for RGB 1 1
Remote 1 - |
|
0.8W
monaural (-5dBs, high impedance) |
|
|
100-240V
(UL listed for 120V, only)
50/60Hz |
|
NTSC,
NTSC4.43, PAL, and SECAM |
|
|
|
