Status menu Identify monitor setup - The new "Status" menu is a convenient reference for identifying the monitor model name and existing monitor settings for color system, color temp, component level, color setup levels, ACC, comb filters, and input boards. Serial remote menu Identify/select remote setup - The new "Serial Remote" menu is a convenient reference for identifying and selecting the setup for the remote control: OFF, ON, single address*, group address. By viewing this menu, the user can identify and activate the serial remote. (*when the optional BKM-103 is installed) Sub control menu Convenient sub controls setup - The "Sub Control" menu allows on screen adjustment of the center "detent" value of the contrast, brightness, chroma, and phase knobs. User copy menu Copy D65 & D93 temperature settings - The new "User Copy" menu allows the user to copy D65 and D93 temperature settings into the "user setting" to speed custom white balance adjustment. Linearity Horizontal <5% Vertical <5% Power consumption 115W Frequency response Line (composite) 10MHz ± 3dB (Y signal only) RGB 10MHz ± 3dB Y/C 10MHz ± 3dB (Y signal only) Normal scan 7% Underscan 5% Convergence Center 0.6mm Corner 1.0mm Synchronization AFC time constant 1.0mS Operating temperature 0-35°C (32-95°F) Storage temperature -10~40°C (14-104°F) Humidity 0~90% Color Temperature 6500K, 9300K, USER (3200K-10000K) Cabinet Light gray Resolution 600 TV lines Dimensions W x H x D 450mm (17.72")W x 457mm (17.99")H x 503mm (19.8")D Weight 30kg (66lbs 2oz) CRT size 20" (19" viewable area, measured diagonally) AG pitch .4mm Phosphor type P-22 Aperture correction 0~+6dB Inputs/Outputs IN OUT Composite 2 2 Y/C 1 1 Analog RGB/ 1 1 Component 1 1 Ext. Sync for RGB 1 1 Remote 1 - Audio out 0.8W monaural (-5dBs, high impedance) AC input 100-240V (UL listed for 120V, only) 50/60Hz Color standards NTSC, NTSC4.43, PAL, and SECAM Rack unit height 11 RU