Power requirements: AC 100 to 120 V ,0.4 A (max.), 50/60 Hz Power consumption: 30 W (max. power on), 3 W (typical power off) Operating temperature: 0 to 35°C (50 to 96°F) Input Connector Video 1: Composite: Loop-through BNC S Video: Loop-through Mini DIN 4-pin Video 2: Composite (composite/-/-). Component (G/B/R, Y/B-Y/R-Y): Loop-through, D-sub 15-pin Video 3: Component (G/B/R, Y/B-Y/R-Y): Loop-through, D-sub 15-pin Audio 1/2/3: L/R RCA jack Output connector Video out: Composite BNC S Video: MINI DIN 4-pin Component: (G, B, R, B-Y/R-Y): D-sub 15-pin Audio: L/R RCA jack Signal level Composite:1 Vp-p (typical), (Video 1: Automatic 75 ohms S Video: termination, Video2: 75ohms/ Hi-Z) Y: 1 Vp-p (typical), sync negative C: 0.286 Vp-p (NTSC)/0.3 Vp-p (PAL) (typical) Component: Automatic 75 ohms termination G/B/R input: 0.714 Vp-p (typical) (Video 2: auto sync, Video 3: sync on G/external sync, switchable), 75ohms/ Hi-Z HV.sync/c. sync: 1~5 Vp-p G/B/R output: 0.714 Vp-p (typical) (with external sync), 75ohms (typical) HV.sync/c.sync: TTL Y/B-Y/R-Y input: 0.7 Vp-p (typical) (NTSC/PAL, sync on Y), 75 ohms/ Hi-Z Y/B-Y/R-Y output: 0.7 Vp-p (typical) (with sync on Y), 75 ohms (typical) Format conversion Capture range: fH: 15.6 to 70 kHz, fV: 50 to 120 Hz Sampling rate: 14.3 to 40 MHz offset phase max. (Equivalent to 80MHz sampling) Output pixel clock: 14.3 to 50 MHz Line doubler: Line doubled vertically for each field Genlock: Reference: Black/burst signal on VIDEO1 input Applicable to NTSC/PAL outputs only Genlock ON/OFF, SCH adjustment Picture adjustment: CONTRAST/PHASE (except for GBR/YBR/PAL)/ CHROMA (except for GBR) SIZE/CENTER/ZOOM (x2, x3, x4).APERTURE (ON/OFF)/STILL (ON/OFF)