|
|
|
|
The
HDW-700A is a HDCAM Digital High Definition Camcorder utilizing
Sony's 2 million-pixel PowerHAD™ Frame-Interline Transfer (FIT)
CCD imagers and 10-Bit 74.25MHz DSP processing of the RGB video.
The camcorder was designed as a one-piece, highly mobile and
robust field acquisition system. The HDW-700A is supported by the
HDW-500 studio VTR to create a highly versatile HD editing and
post production system. The camcorder uses Sony's BCT series HD
half-inch Metal Particle Tape. The standard small cassette allows
40 minutes recording time.
|
|
-
Full-sampling 2/3" CCD 996 Mb/sec transfer rate (at an
8-bit bandwidth)
-
Three optical pre-filters plus sample-and-hold circuit and
low-pass output filter
-
Nearly identical vertical and horizontal response
-
Compact, 17 lb design
-
Low power consumption
-
Six "Shadow Quantizers"
-
Memory chip "setup card"
|
|
H
x W x D: 5.52 x 10.44 x 7.83 inches (140 x 265 x 340mm) |
|
Approx.
16.53 lbs. (8.0kg)
(Operating weight with lens, cassette and battery) |
|
32°F
to 104°F (0°C to 40°C) |
|
|
-4°F
to 140°F (-20°C to 60°C) |
|
|
25
to 85% (relative humidity) |
|
|
Continuous
Operating Time |
|
Approx.
120 min. (with one BP-L90), or 80 min. (with one BP-L60) |
|
54dB
unweighted measured over 30Mhz bandwidth |
|
|
|
