The TM9-1 is multi-format capable of accepting Composite or Y/C signals from NTSC or PAL sources.

The TM9-1 can accept virtually any power source. 100 to 230 volts(50/60Hz) from any AC outlet. A convenient 4pin XLR connector is provided for 12 volt DC input. In addition, threaded mounting holes are provided for an Anton Bauer or PAG battery bracket. .

For optimum performance in any system requring separate Y/C signals, such as an S-VHS editing suite. Separate 4 pin connectors are provided.

In addition to the Y/C input, two aditional Composite Video inputs with loop through are provided.

A Comb Filter circuit is provided for optimum chrominance and luminance separation. The Comb Filter prevents cross color and dot crawl interference of NTSC signals.

A conveniently located, easy to see tally lamp is located on the front of the monitor.

An 8 pin female DIN connector located on the rear panel allows remote on/off control of several functions, including Tally, by simply grounding the assigned pin.

Scanning can be changed between 4:3 and 16:9 aspect ratios by simply pushing the appropriate front panel switch.

Underscan mode can be selected by pushing the appropriate switch on the front panel. It allows viewing of the entire active picture.

Hue and Saturation color level adjustments as well as noise level checks are made easy when the Blue Check Mode is selected on the front panel.

The pulse cross mode allows visualization and monitoring of vertical and horizontal blanking period. used as synchronous reference signals for cameras

While balance settings can be verified by using the Color Off switch.

Independent External Sync input with loop through is provided.

The AFC time constant can be decreased to allow viewing of images that have VTR generated jitter. Arear panel

located switch is provided.

A 3.5 inch side mount Speaker powered by an internal 1Watt amplifier is provided for audio monitoring.

Two RCA connectors with bridged output are provided.